KB856919 | HOW TO: Create a Hybrid Assessment

KB856919 | HOW TO: Create a Hybrid Assessment

This lesson covers the creation of a Hybrid Assessment. This is an assessment that you would like students to take online, and you have a Word, PDF or PowerPoint file of it that you would like to upload to allow students to read it on their screen while selecting their answer choices (side by side).

1. Select Assessments.

2. Under General, click Create a New Assessment.

1. Select Manual/Hybrid Assessment.

2. Enter the number of questions, that will be on your assessment.

3. Click Okay.

1. Enter a Title.  This is the only requirement on this information page, however, the more specific you get in this area, the easier it will be to find your assessment later using filters.

2. Optional- Enter a Description. The description will not tie to filters but can contain any information you find helpful. Information entered here also displays on the Assessment Details page as well as the landing page for a student when they are about to begin an online assessment. So, you could enter extra Instructions or even Test Taking Strategies to display for students.

Looking for more assessment information options? Click More Options (See below for more information).

3. Local Identifier- Any local district ID you may want to use.

4. To associate your assessment to a particular year, select the year from the Academic Year drop down menu.  If you want your assessment to be used again each year, select Repeats Yearly.  This means there is no need to duplicate your assessment for each academic year.

5. Optional-To help with filtering, select: Subject, Scope and/or Grade Levels.

6. You can choose to show assessment results in the Student and Parent Portal (If your District is utilizing this feature). Selecting Yes, means the results of the student's assessment will show in the portal. Selecting No will show that the test was assigned, but will not show students/parents the results.

7. You can also select a Performance Band Set.

8. Click Next.

Lock Assessment-Manage Lockdown Preferences  (Only displays if applicable to your permission level)

Lock Assessment-Manage Lockdown Preferences- This allows you to customize exactly what parts of an assessment or administering an assessment are locked from others that this assessment is shared with. You can select as many or as few as you like, once Submit is clicked, any time you select 'Lock Assessment' on the New Assessment Information screen, these preferences will apply to that lock.

It is possible for lockdown preferences to be different for certain people. Lockdown preferences are specific to site, not URL. Typically, a System Admin user creates the lockdown preferences at the district level. These lockdown preferences will filter down to every user at every site for every assessment except when a new lockdown preference is set at a site. So the user (with the lockdown permission) will need to be logged into a site in the Control Panel when they create the new lockdown preference. This new lockdown preference will only affect users with locked assessments, that are logged into that site. 

1. Select the subject and the grade level for the standards to which you will be tying your assessment items/questions. Click Search.

2. You can click any plus (+) symbol to expand the strand or sub-strand and see the standards housed within.

3. Select standards for your assessment by checking them. Note that you can come back to this step numerous times.

4. After selecting all of your desired standards, click Link Selected Standards.

5. To align standards to questions, click on the # under Questions in the Already Linked Standards box (See more below) OR align during the next step while creating your Answer key.

6. When finished, click Next.

Standards Alignment

1. On each question's row, click the checkbox next the standard with which you want it to align. Note that you may opt to link a question to more than one standard.You can also use the check box next to the standard text to select that all questions be aligned to that particular standard.

  • Click the Flip icon if you would like to view and select standards by column rather than row. However, if you have already selected some standards, be sure to click Save first. When you are finished selecting standards for questions, click Save.

2. Click Save when finished.

NOTE: If you chose to align questions to standards at this point, you will be taken out of the wizard and brought to the older assessment creation view. To jump back into the wizard, click Setup > Creation Mode.

1. Enter the answer to each of your questions in the Correct column. You may opt to use the tab key on your keyboard to advance your cursor.

2. Weight- Enter a point value for the answer choice, note that the system does support decimal point values, i.e. 1.5, 2.3, 1.2, etc.

3. You can add additional questions by inputting a # and pressing + Add Questions.

4. You can assign Question Groups by clicking the+ sign, and copy them down to all questions by clicking the down arrow. (See below for more information on setting up Question Groups.)

5. You can link Standards by clicking the+ sign, and copy them down to all questions by clicking the down arrow.

6. You can delete questions by clicking the checkbox under the Delete column and pressing Save or Remove Selected Questions.

7. After all your answers are entered, click Save or Next to move on.

You may opt to require up to 9 answers for any question(s) on your assessment.

Follow these guidelines:

- Enter all answers the student will be required to bubble in order to get the question correct.

- Enter the answers in alphabetical order (for example, type "AB" and not "BA").

- Enter the answers with no spaces or characters between letters (BCE' not 'B C E') if all answers are correct.

- Enter the answers with commas between the letters (for example, type 'D, E')  if either answer is correct.

-  Enter a star character ( * ) on the answer key to give a student credit for blanks versus the system marking those answers incorrect. This also designates students who didn’t mark the correct answer. For example, if a student was not required to take an entire assessment, or answer specific questions (SpEd, certain program, etc.) the star will act as a default to indicate they did not bubble the answer but received credit.

If you want to assign different point values for specific answers or answer combinations, you can do that from within the "Correct" box for any question. Select the Advanced box and follow the notes on this process:

  • To indicate the point value to associate with an answer choice, write the letter of the answer, a colon, and then the points earned for that selection (e.g. A:2)
  • To list multiple answers as having point values, list all answers and their points, separated by a comma (e.g. A:2, B:1 or 1:2, 2:4). In an example above (Q2) each rubric score is a different value. This means that if a 1 is bubbled on the answer document, the 
student is awarded 1 point; if a 2 is bubbled, the student is awarded 4 
points; if a 3 is bubbled the student receives 6 points.
  • If you want to indicate that a student can get a particular point value through selecting multiple answer choices, write the answer choices, a colon, and the value (e.g. ABC:4)
  • You can list as many point value options as you like so that you have full flexibility to have partial and full credit (e.g. A:2, B:1, C:1, AB:3, ABC:4)
  • Rubrics (Q1 above)- In the "Points" column, you will want to indicate the maximum number of points that a student can receive for that question. The highest value in the "Correct" column must not exceed the value in the "Points" column. If you enter your answer key such that there are correct answers with point values that exceed the maximum "Points", you will get an error when you try to save your answer key. Rubric questions will display online as Constructed Response questions with a text box for student answer entry.

1. In the Correct box, write out the point value for each answer choice by letter : point value. This should be followed by a comma if entering more values.

For example, A:2, B:1, C:0.5, etc.

2. In the Weight box, enter the MAXIMUM point value possible.

3. When done, click Next.

Note: Clicking on the blue ? will populate a menu that explains all of the instructions/options directly on the questions page!

To set up Constructed Response questions on a Hybrid Assessment, treat the CR questions as rubric questions.

1. Click the Rubric checkbox.

2. Add the maximum point value in both the 'Correct' and 'Points' boxes.

3. Press Next.

Once a student starts the exam, these questions will show up with a text box so students can type in their answers. Note, you have to manually enter the score for these questions. You will see their answers under Administration > Enter/Edit > Find Students > Constructed Response.

This is where you will attach the test and/or materials students will view next to the answer key.

If only 1 material or attachment is provided, this will default to be the selected Inline Booklet for Online Testing Administration. If more than 1 material or attachment is attached, you will need to select and confirm which attachment is to be available online.

1. Click Upload.

2. Drag and drop the materials you want attached to the test, once uploaded they will show with a green checkmark. Reminder: Illuminate supports Word (.doc, .docx), PDF (.pdf), or PowerPoint (.ppt, .pptx) files at this time.

3. Click Attach.

Once materials have been uploaded, you can edit them from the Materials page.

4. Note that if you click the checkbox next to a document, then you have the ability to download the document (Cloud button)  or delete the document (Trash Can button).

The sheet designer is optional, but may be necessary if you need to change answer choices beyond the default multiple choice A-E options. Looking at your assessment's design or answer key, all items fall into two types (See more information below).

Based on how the answer key is set up, your Sheet Designer will provide various ways the answer sheet will support the administration,.

1. First off, you have the ability to change the number of responses on your answer sheet. Click on Change number of responses. You will be given a dropdown menu with selection choices of 2 thru 9. Click your desired number and press Apply. The changes will be reflected immediately in your sheet designer.

By default, Multiple Choice questions will be displayed as an A-E, or 5 available answer choices.

Multiple Choice means it can be:

  • Single Answer
  • Multiple Answers
  • Number Grid Answer (enter value)
  • Either/Or Answers
  • Yes/No, True/False, Agree/Disagree, Correct/Incorrect, or
  • Anything that can be graded by the computer with explicit instruction as to what is correct and incorrect.

By default, Rubric or Constructed Response questions will be displayed as a rubric with bubble point values.

Rubric means it can be:

  • Short Answer
  • Short Phrase/Sentences
  • Short Paragraph
  • Essay
  • Math Grid
  • Blank for Math work, or
    • Anything that has a specific value where the Teacher needs to evaluate student work, capture student work, and/or enter a value.

You can change item settings such as Answer Choices, Label, or Characters to be placed in the bubble (Or added as an option for online administration).

1. Click the checkbox next to any questions you wish to alter.

2.Change Question Label. This is how the question number is displayed on the answer sheet. An extra credit/advanced question may be shown as 'Adv.' on the answer sheet. There is a limit of 3 characters in the question label column.

To change the Question Label, check Label. You have three options:

  • Put in Front (Prepend): Enter any alphanumeric character you want to show before the question number.
  • Start at: Enter the question number you want to display as the first number of your check marked questions. For example, you may want questions 4-6 to be labeled W1, W2, W3 instead of W4, W5, W6.
  • Put After (Append): Enter any alphanumeric character you want to show after the question number.

3. Responses-Feel free to change characters (e.g. Y and N for Yes/No, T and F for True/False, numbers for rubric-based items, etc.). The characters you include here will appear on the answer sheet just as you type them. Note that only one character is allowed per bubble.

4. Enter your answer choices in the boxes. To use alternate answer choices, check Alternate.

5. If you indicated a rubric-based question on the Questions tab, you will see numbers already inserted for that particular question.

Note: Any rubrics you opt to use and any non-ABCDE answers you opt to use must match your sheet design.

In other words, if you designated an answer other than A-E, you must change your sheet design so that your answer is an option on the sheet. When entering values, note that the system is not case sensitive. When you save your work, all values will become capitalized.

6.Click Save when you are finished. Repeat this process as many times as needed.

To share this assessment with other users:

1. Select who you would like to share with, i.e. Grade Level. Based on what you chose, you will get some specific options. Select any that apply.

2. Give users the ability to: View and Download the test, Administer the test, and/or Edit the test.

3. Click Share. Once you've shared with users, they will display at the top of this pag

Created by Illuminate
    • Related Articles

    • KB856920 | HOW TO: Create a Flexible Assessment

      This lesson covers the creation of a Flexible Assessment! This assessment is meant for online testing administration providing a flexible and efficient way to build your own teacher materials into assessments for your students. While these ...
    • KB856918 | HOW TO: Create a Manual Assessment

      This lesson covers the creation of a manual assessment. This is an assessment that you would like to create an answer key for, then manually enter scores or print answer sheets. Note: Creating an assessment manually (i.e. without "scanning" an answer ...
    • KB856945 | HOW TO: Create and Manage Assessment Versions

      In this lesson, you will learn how to create version answer keys if your assessment has multiple versions. When version answer keys are created, Lightning Grader and Illuminate will be able to appropriately score as your key is designed. Answer ...
    • KB856917 | HOW TO: Create an "On the Fly" Assessment with Lightning Grader

      This lesson will walk you through scanning students responses with Lightning Grader! LiG is a fast, easy way to scan student responses and determine their performance. 1. Print Answer Sheets Make sure to have reviewed Print Answer Sheets for Generic ...
    • KB856921 | HOW TO: Create, Edit or Delete a Skills Assessment

      This lesson will guide you through the process of creating a Skills Assessment. Skills Assessments are an easy way for teachers to assess student’s recognition of numbers, short words, letters, etc. The teacher sets up a series of questions (or ...